产品展示
    CXZ-B Air jet loom
    Detailed introduction：

    Main technical parameters:
    1. Designed revolution speed 800rpm～1200rpm
    2. Whole machine power: 3KW～6.5KW.
    3. Filling insertion rate.1500m/min～2500m/min
    4. Single-machine sound pressure: less than 85db
    5. Air consumption: 0.5m3/min～0.9m3/min
    6. Manufacturing range: short fiber: 100Ne～2.5Ne; filament: 56dtex～1350dtex
    7. Weft density range: 6～300 yarns/inch
    8. Weft insertion system: less than or equal to 8 colors

     

    Technical specifications of CXZ-B air jet loom

    Reed width:190cm, 230cm, 280cm, 330cm, 360cm

    Selected by user

    Manufacturing range

    Short fiber: 100Ne～2.5Ne;
    filament: 56dtex～1350dtex

    Weft insertion

    Auxiliary jet set number (less than or equal to 18 paths and
    equipped according to the actual condition; drawing nozzle,
    WBS brake device (Optional part)
    Main jet: two-color, four-color, six-color (selected by user)

    Shedding

    Crank shedding (4 pieces of heald frames);
    negative cam case (less than or equal to 10 pieces of heald fames);
    positive cam case｛without automatic heald leveling function
    (less than or equal to 8 pieces of heald frames)
    and with automatic heald leveling function
    (less than or equal to 10 pieces of heald frames)
    Mechanical multi-arm｛upper type and lower type
    (less than or equal to 16 pieces of heald frames)｝；
    electronic multi-arm｛upper type and lower type
    (selection of heald frames) less than or equal to 16 heald frames｝;
    jacquard shedding (optional).

    Warp pacing

    Negative warp pacing (optional);
    electronic warp pacing｛single-side electronic warp pacing (standard),
    double-side electronic warp pacing (optional)｝

    Warp loosing device

    Positive warp loosing device (standard),
    negative warp loosing device (optional)

    Package

    800mm (standard);
    1000mm(large package, optional);
    separating type large package

    Reeling

    Electronic reeling 6～300 yarns/inch (standard),
    mechanical reeling 6～200 yarns/inch (optional)

    Temple form: upper temple (standard), lower temple (optional)

    Package:520mm (crank shedding, optional); 600mm (standard);
    separating large package (optional)

    Beating-up

    Four-bar linkage beating-up (less than 250 reed width),
    six-bar linkage beating-up (more than 280 reed width);
    equipped with beating-up middle support,
    and balance device (equipped according to the actual condition)

    Weft yarn rack

    Double-jet：floor type four-bobbin (standard);
    four-jet：floor type eight- bobbin (optional)

    Edge

    Planet twisted edge (standard); doup edge, mechanical weaving edge,
    pneumatic type weaving edge (optional)

    Selvage (standard);edge shearing：mechanical (standard), electric (optional)

    Stopping device

    Weft detection automatic stopping｛two-hole type weft diction head (standard),
    three-hole type weft detection head (optional)｝;
    warp breaking automatic stopping (6-line contact lever type, standard);
    edge twisting automatic stopping,
    selvage discarding automatic stopping (standard)

    Refueling

    Manual grease pump

    　

    Standard

    Electric grease pump

    　

    Optional

    CXZ-B high-speed air jet loom
    The CXZ-B high-speed air jet loom is researched, developed and improved based on Japanese Tsudakoma ZAX type air jet loom and is the most advanced air jet loom in China. The loom features advanced technology, wide range of fabric varieties, high linear speed, and high environmental performance, is the most advanced weaving equipment for replacing the rapier and shuttle looms, and provides the reliable guarantee for the technical innovation of the textile industry, increasing of exporting of the garment materials and bedding fabric, and participation in competition in the international market.
    Main technical characteristics:
    1. Energy saving: The CXZ-B high-speed air jet takes energy saving into complete and deep consideration. The eccentric rockshaft with the small inertia moment and the hollow steel reed are adopted, and the load in power oil bath is reduced, so that the performance of energy saving is exerted. Moreover, every two auxiliary nozzles are equipped with one solenoid valve, and the air channel is shortened to the maximum extent, so that the air consumption (compared with that of the original loom) is reduced by about 10%, and the low-pressure weft insertion facilitating the weft yarns is realized.
    2. Full weaving support: The CXZ-B high-speed air jet loom adopts the weave navigation system which integrates the international most advanced weave experience and the professional technology. Through the simple input on the navigation keyboard, the weave with the professional technical level can be realized easily. Even in the running process of the loom, the system can correctly guide the loom to be in the optimum running state.
    3. Excellent super high speed performance and low vibration: High speed performance is the task of the air jet loom. Through the complementary effects of the most reasonable weave geometry, the beating-up mechanism with high balance, the weft insertion system with the highest level in the word and the newly designed tough rack structure, the CXZ-B high-speed air jet loom ensures that the shedding actions of the warp yarns are smooth and avoids the mutual contradiction of the super high speed performance, low vibration and energy saving perfectly.
    4. Extremely simple and convenient operation: The CXZ-B high-speed air jet loom is required to have the excellent operability to realize high-efficiency weaving and production. The operation simplicity and convenience of the new loom is shown in complete implementation of the new weave supporting loom in every detail. Both the software and the hardware of the CXZ-B high-speed air jet loom adopt the user-friendly design which is easy to operate.

    On a：Cut roll machine　next：Medical Gauze making Air jet loom Machine